Development of an expert system for technological support of required roughness when machining hardened steel parts on numerically controlled machines | Kuznetsova | iPolytech Journal

iPolytech Journal

ISSN 2782-4004 (Print)
ISSN 2782-6341 (Online)

eng | рус

Preview

iPolytech Journal

Advanced search

Archives

Download this PDF file

For citations:

Kuznetsova E.M., Ovsyannikov V.E., Nekrasov R.Yu., Putilova U.S. Development of an expert system for technological support of required roughness when machining hardened steel parts on numerically controlled machines. iPolytech Journal. 2024;28(3):418-426. (In Russ.) https://doi.org/10.21285/1814-3520-2024-3-418-426. EDN: WNRBPW

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.

ISSN 2782-4004 (Print)
ISSN 2782-6341 (Online)

* not an advertisement

Indexing Databases

* not an advertisement

Popular articles

Editor-in-Chief

Denis N. Sidorov

Article Tools

Finding References

Email this article (Login required)

Email the author (Login required)

About the Authors

E. M. Kuznetsova
Kurgan State University
Russian Federation

Elena M. Kuznetsova - Senior Lecturer of the Department of Industrial Process Automation.

63/4 Sovetskaya St., Kurgan 640669

V. E. Ovsyannikov
Industrial University of Tyumen
Russian Federation

Viktor E. Ovsyannikov - Dr. Sci. (Eng.), Associate Professor, Professor of the Department of Mechanical Engineering Technology.

38 Volodarsky St., Tyumen 625000

R. Yu. Nekrasov
Industrial University of Tyumen
Russian Federation

Roman Yu. Nekrasov - Cand. Sci. (Eng.), Associate Professor, Head of the Department of Mechanical Engineering Technology.

38 Volodarsky St., Tyumen 625000

U. S. Putilova
Industrial University of Tyumen
Russian Federation

Ulyana S. Putilova - Cand. Sci. (Eng.), Associate Professor, Associate Professor of the Department of Mechanical Engineering Technology.

38 Volodarsky St., Tyumen 625000

Notifications