An analytical method for solving the problem of heat network load flow
https://doi.org/10.21285/1814-3520-2021-1-80-96
Abstract
The author aimed to develop an analytical solution to the problem of the load flow of a six-, eleven- and twelve-circuit heat network, as well as to solve the problem of optimisation of a multi-circuit heat network, including the choice of the objective function and the determination of a number of variable technical parameters. For accelerating the optimisation process, the method of decomposition of the heat network graph was used. Decomposition involves is cutting the network graph at some nodes for the transition of a multi-circuit scheme to a branched scheme in the form of a tree. Optimisation of each branched circuit was carried out by the dynamic programming method, as a result of which new values of the variable parameters were obtained at the current iteration. Next, the author returned to the multi-circuit scheme to solve the load flow problem and calculate the value of the objective function. The iterative convergence of the decomposition method was not mathematically proven. The author proposed a method for splitting the graph, which eliminates the decomposition procedure when optimising a heat network. The following methods were applied: mathematical modelling of the hydraulic circuit, graph splitting method and the analytical method for solving the algebraic equation of the fourth degree. The following results were achieved: a scheme of the minimum element of a multi-circuit heat network was determined, the possibility of series and parallel circuits of minimum elements was shown, and analytical dependencies for the problem of load flow of a heat network of these schemes were obtained. The proposed analytical solution of the load flow problem for a multi-circuit heat network allows the problem of calculating a complex network to be reduced to the calculation of several minimum elements, which significantly reduces the amount of computational work when modelling a hydraulic circuit. The provided examples show that the calculation error does not exceed 3%.
About the Author
S. V. YakshinRussian Federation
Sergey V. Yakshin, Leading Engineer
130, Lermontov St., Irkutsk 664033
References
1. Merenkov АP, Khasilev VYa. The theory of hydraulic circuits. Мoscow: Nauka; 1985, 278 p. (In Russ.)
2. Sennova EV, Sidler VG. Mathematical modeling and optimization of developing heat supply systems. Novosibirsk: Nauka; 1987, 222 p. (In Russ.)
3. Novitsky NN, Aver'yanov VK, Sennova EV, Karasevich AM, Stennikov VA, Edeleva OA, et al. Development of methods of hydraulic circuits theory for analysis and synthesis of properties of pipeline systems as control objects. In: Truboprovodnye sistemy energetiki: matematicheskoe i komp'yuternoe modelirovanie = Energy Pipeline Systems: Mathematical and Computer Modeling. Novosibirsk: Nauka; 2010, p. 58–73. (In Russ.)
4. Tokarev VV, Shalaginova ZI. Technique of multilevel adjustment calculation of the heat-hydraulic mode of the major heat supply systems with the intermediate control stages. Teploenergetika = Thermal Engineering. 2016;1:71-80. (In Russ.) https://doi.org/10.1134/S0040363616010112
5. Tokarev VV. Developing a procedure for segmenting ring heat networks of closed heat supply systems. Teploenergetika = Thermal Engineering. 2018;6:84–94. (In Russ.) https://doi.org/10.1134/S0040363618060103
6. Cross H. Analysis of flow in networks of conduits or conductors. Series/Report: University of Illinois. Engineering Experiment Station. Bulletin; no. 286. 1936. Available from: http://hdl.handle.net/2142/4433 [Accessed 25th May 2020].
7. LaViolette M. On the history, science, and technology included in the Moody diagram. Journal of Fluids Engineering. 2017;139:3. https://doi.org/10.1115/1.4035116
8. Todini E, Pilati S. A gradient algorithm for the analysis of pipe networks. In: Coulbeck B, Orr Chun-Hou (eds.). Computer applications in water supply. London: John Wiley & Sons Research Studies Press; 1988. Available from: https://www.researchgate.net/profile/Ezio_Todini/publicati on/221936261_A_gradient_method_for_the_analysis_of_ pipe_networks/links/0046351c42430e1178000000.pdf [Accessed 25th May 2020].
9. Brkić D, Ćojbašić Ž. Evolutionary optimization of Colebrook's turbulent flow friction approximations. Fluids. 2017;2(2). https://doi.org/10.3390/fluids2020015
10. Praks P, Brkic D. Choosing the optimal multi-point iterative method for the Colebrook flow friction equation. Processes. 2018;6(8). https://doi.org/10.3390/pr6080130
11. Praks P, Brkic D. Advanced iterative procedures for solving the implicit Colebrook equation for fluid flow friction. Advances in Civil Engineering. 2018;2018. https://doi.org/10.1155/2018/5451034
12. Medhi Das B, Sarma B, Mohan Das M. Error analysis of friction factor formulae with respect to Colebrook-White equation. International Journals of Science and Research. 2017;6(3):2105–2109.
13. Novitsky NN, Tokarev VV. Relay method of calculation of flow distribution in hydraulic circuits with adjustable parameters. Izvestiya Rossijskoj akademii nauk. Energetika. 2001;2:88–98. (In Russ.)
14. Baranchikova NI, Epifanov SP, Zorkal'tsev VI, Kurtin AV, Obuzdin SYu. Flow distribution in water supply and distribution systems with automatic pressure regulators. Vodosnabgenie i sanitarnaya texnika = Water supply and sanitary technique. 2017;4:55–62. (In Russ.)
15. Korel’shtein LB. Existence, uniqueness and monotonicity of the solution of the flow distribution problem in hydraulic circuits with pressure-dependent closing relations. In: Matematicheskie modeli i metody analiza i optimal'nogo sinteza razvivayushchihsya truboprovodnyh i gidravlicheskih sistem: trudy XVI Vserossijskogo nauchnogo seminara = Mathematical Models and Methods of Analysis and Optimal Synthesis of the Developing Pipeline and Hydraulic Systems: Proceedings of XVI AllRussian scientific seminar. June 26 – July 2 2018, Irkutsk. Irkutsk: Melentiev Energy Systems Institute of the Siberian Branch of the Russian Academy of Sciences; 2018, p. 55–83. (In Russ.)
16. Brkic D. Discussion of «Economics and statistical evaluations of using Microsoft Excel solver in pipe network analysis» by I.A. Oke, A. Ismail, S. Lukman, S.O. Ojo, O.O. Ade-osun, and M.O. Nwude. Journal of Pipeline Systems Engineering and Practice. 2018;9:3. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000319
17. Hoyo Arce I, Herrero Lopez S, Lopez Perez S, Rama M, Klobut K, Febres JA. Models for fast modelling of district heating and cooling networks. Renewable and Sustainable Energy Reviews. 2018;82(2):1863–1873. https://doi.org/10.1016/j.rser.2017.06.109
18. Yakshin SV. The method of graph splitting and the principle of heating network additivity. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2017;21(4):127–138. (In Russ.) https://doi.org/10.21285/1814-3520-2017-4-127-138.
19. Yakshin SV. Application of graph splittance method when optimizing heating network parameters. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2018;22(10):129–140. (In Russ.) https://doi.org/10.21285/1814-3520-2018-10-129-140
20. Kaganovich BM, Stennikov VA, Zarodnyuk MS, Yakshin SV. Equilibrium ecological modeling of integrated energy systems. In: Matematicheskie modeli i metody analiza i optimal'nogo sinteza razvivayushchihsya truboprovodnyh i gidravlicheskih sistem: trudy XVI Vserossijskogo nauchnogo seminara = Mathematical Models and Methods of Analysis and Optimal Synthesis of the Developing Pipelines and Hydraulic Systems: Proceedings of XVI All-Russian scientific seminar. June 26 – July 2 2018, Irkutsk. Irkutsk: Melentiev Energy Systems Institute of the Siberian Branch of the Russian Academy of Sciences; 2018, p. 34–43. (In Russ.)
Review
For citations:
Yakshin S.V. An analytical method for solving the problem of heat network load flow. Proceedings of Irkutsk State Technical University. 2021;25(1):80-96. (In Russ.) https://doi.org/10.21285/1814-3520-2021-1-80-96