PROCEDURE OF OPTIMAL LOGICAL DIAGNOSIS ALGORITHM CONSTRUCTION

The PURPOSE of the paper is to create an optimal logical algorithm based on functional diagram analysis for the technical diagnosis of industrial frequency converters. METHODS. An analytical criterion of diagnostic algorithm optimality is formulated as a minimality of average costs for determining one technical state of the object of diagnosis. An algorithm is developed for the solution of the problem of finding a sequence of elementary diagnostic tests of industrial frequency converter functional blocks, which satisfies the formulated criterion. The main stages of solving the problem are identified: the analysis of the functional diagram of the device being diagnosed for the expediency of diagnostic tests of functional blocks in various situations; selection of the block to be tested first, determination of tree parts representatives, formation of possible sequences of elementary test execution in configuration branches, identification of sequences characterized by minimum average costs of implementation; synthesis of the configurations of optimal algorithms from previously determined composite parts. The developed procedure is implemented in the high-level programming language Object Pascal by means of Delphi integrated environment. RESULTS AND THEIR DISCUSSION. The paper presents the procedure of configuration construction for the optimal logical algorithm of electrical equipment diagnosis. A specialized application FC_OPTIM has been created in the framework of this procedure program implementation as applied to industrial frequency converters. Two configurations of logical diagnostic algorithms satisfying the criterion of optimality have been constructed. One of the received configurations corresponds to the MPT-algorithm of frequency converter diagnosis developed by the author of the present article. The algorithm is used when structuring the knowledge base of an expert complex for adjusting frequency converters FC3. CONCLUSIONS. An optimal logical algorithm has been developed for the technical diagnosis of industrial frequency converters. It is based on the analysis of the functional diagram.

industrial frequency convertor, functional diagram of the device, basic diagnostic test, optimal diagnosis algorithm, procedure of diagnosis algorithm construction, average cost of diagnosis, configuration of diagnosis algorithm

1. Бахвалов С.В., Дунаев А.М. Анализ оптимальных алгоритмов технического диагностирования // Вестник ИрГТУ. 2016. № 7. С. 55-59. https://doi.org/10.21285/1814-3520-2016-7-55-59

2. Техническая диагностика: сб. науч. тр. I Всесоюзного совещания по технической диагностике / под общ. ред. П.П. Пархоменко. М.: Наука. 1972, 368 с.

3. Григорьев А.В., Осотов В.Н. Диагностика в технике. Понятия, цели, задачи // Электротехника. 2003. № 4. С. 46-51.

4. Забокрицкий Е.И., Холодовский Б.А., Митченко А.И. Справочник по наладке электроустановок и электроавтоматики. 3-е изд., перераб. и доп. Киев: Наукова думка, 1985. 704 с.

5. Мозгалевский А.В., Калявин В.П., Костанди Г.Г. Диагностирование электронных систем. Л.: Судостроение, 1984. 224 с.

6. Осипов О.И., Усынин Ю.С. Техническая диагностика автоматизированных электроприводов. М.: Энергоатомиздат, 1991. 160 с.

7. Дунаев М.П. Экспертные системы для наладки электропривода: монография. Иркутск: Изд-во ИрГТУ, 2004. 138 с.

8. Дунаев М.П., Дунаев А.М. Экспертный комплекс для наладки преобразователей частоты // Информационные и математические технологии в науке и управлении: материалы XX Байкальской Всерос. конф. (Иркутск-Байкал, 29 июня - 07 июля 2015 г.). Иркутск: Изд-во Института систем энергетики им. Л.А. Мелентьева СО РАН, 2015. Ч. III. С. 20-28.

9. Mukhopad Yu.F., Dunaev M.P., Mariukhnenko V.F., Skrypnik O.N., Sizykh V.N. Management of technical automation equipment of technological processes // Far East Journal of Electronics and Communications. Pushpa Publishing House, Allahabad, India. 2017. Vol. 17. No. 5. P. 1021-1028.

10. Бахвалов С.В., Дунаев А.М., Дунаев М.П. Выбор алгоритма для построения базы знаний экспертной системы диагностирования электрооборудования // Информационные и математические технологии в науке и управлении. 2016. № 2. С. 46-51.

11. Дунаев М.П., Дунаев А.М., Каргапольцев С.К., Гозбенко В.Е. Метод структурирования базы знаний экспертной системы для диагностирования электрического оборудования // Современные технологии. Системный анализ. Моделирование. 2017. № 1 (53). С. 86-89.

12. Arshinskiy L.V., Arshinskiy V.L., Dunaev M.P., Dunaev A.M., Aslamova V.S. Development of the expert system of electrical equipment setup based on logic with vector semantics // Far East Journal of Electronics and Communications. Pushpa Publishing House, Allahabad, India. 2017. Vol. 17. No. 5. P. 1119-1125.

13. Dunaev M.P., Daneev A.V., Kargapoltsev S.K., Kashkovsky V.V., Kuznetsov B.F. Creation method of the expert systems for electrical installation // Far East Journal of Electronics and Communications. Pushpa Publishing House, Allahabad, India. 2017. Vol. 17. No. 5. P. 1011-1019.