Formal method for selecting rough datum in part machining using graphs of dimensional relationships

We set out to determine formal conditions for selecting rough datum surfaces and rules for specifying the relationships between the surfaces of the workpiece and the part machined by metal-cutting equipment. The research was based on the geometry of non-ideal objects, which represents the geometric configuration of the part or workpiece in the form of a set of surfaces (S) arranged in strict accordance with a set of linear and angular dimensional relationships (V) in a sixdimensional geometric space. The representation of dimensional relationships in each of the six dimensions was performed using graph theory. The algorithm described in the works of V.G. Starostin and V.E. Lelyukhin was used for modeling the process of sequential surface machining. The question of selection of rough datum surfaces was considered. Here, the selection criterion is the possibility of automatic formation of machining sequence without recalculation of the dimension chains defined in the drawing. This criterion eliminates the problem of significant toughening of tolerances and additional 

1. Bazrov B.M. Modular technology in mechanical engineering. Leningrad: Mashinostroenie; 2001, 368 с. (In Russ.).

2. Bazrov B.M. Modular processing and its application in mechanical assembly production. Naukoemkie tekhnologii v mashinostroenii = Science intensive Technologies in Mechanical Engineering. 2014;7:24-30. (In Russ.). EDN: SJARMX.

3. Push V.E, Pigert R., Sosonkin V.L. Automated machining systems. Moscow: Mashinostroenie; 1982, 319 р. (In Russ.).

4. Mitrofanov S.P. Scientific organization of labor in mechanical engineering production. Leningrad: Mashinostroenie; 1976, 712 р. (In Russ.).

5. Andrichenko A.N. Three generations of Russian CAD technological processes. In: CAD/cam/cae Observer. 2017;2:28- 34. Available from: http://www.cadcamcae.lv/N110/28-34.pdf [Accessed 30th September 2023]. (In Russ.).

6. Kharadzhiev A. Integrated automation of manufacturing preparation based on SPRUT technology. SAPR i grafika. 2000;11. Available from: https://sapr.ru/article/8111 [Accessed 30th September 2023]. (In Russ.).

7. Skander A., Roucoules L., Meyer J.-S.K. Design and manufacturing interface modelling for manufacturing processes selection and knowledge synthesis in design. International Journal of Advanced Manufacturing Technology. 2008;37(5- 6):443-454. https://doi.org/10.1007/s00170-007-1003-2.

8. Yusof Yu., Latif K. Survey on computer-aided process planning. The International Journal of Advanced Manufacturing Technology. 2014;75:77-89. https://doi.org/10.1007/s00170-014-6073-3.

9. Ayadi B., Anselmetti B., Bouaziz Z., Zghal A. Three-dimensional modelling of manufacturing tolerancing using the ascendant approach. International Journal of Advanced Manufacturing Technology. 2008;39(3):279-290. https://doi. org/10.1007/s00170-007-1225-3.

10. Sokolovskij A.P. Scientific foundations of the mechanical engineering technology. Leningrad: Mashgiz; 1955, 516 р. (In Russ.).

11. Balakshin B.S. Interchangeability and engineering measurements in mechanical engineering. Moscow: Mashinostroenie; 1972, 615 р. (In Russ.).

12. Starostin V.G., Lelyukhin V.E. Cutting design formalization. Moscow: Mashinostroenie; 1986, 136 р. (In Russ.).

13. Lelyukhin V.E., Kolesnikova O.V., Ruzhickaya E.V. Antonenkova T.V. Geometry of non-ideal objects in engineering (mechanical engineering and robotics). Moscow: Znanie-M; 2020, 104 р. (In Russ.). EDN: AHTHGZ.

14. Lelyukhin V.E., Kolesnikova O.V., Ruzhitskaya E.V. The geometry of non-ideal objects in process engineering for processing parts on machine tools. In: Radionov A.A., Gasiyarov V.R. (eds.). Proceedings of the 7th International Conference on Industrial Engineering. Lecture Notes in Mechanical Engineering. Cham: Springer; 2022, p. 165-173. https://doi.org/10.1007/978-3-030-85230-6_20.

15. Balakshin B.S. Theory and practice of mechanical engineering technology. Moscow: Mashinostroenie; 1982, 367 р. (In Russ.).

16. Yakhin A.B. Designing technological processes of mechanical processing. Moscow: Oborongiz; 1946, 268 р. (In Russ.).

17. Korsakov B.C. Fundamentals of mechanical engineering technology. Moscow: Vysshaya shkola; 1974, 416 р. (In Russ.).

18. Bazrov B.M. Technological bases for self-adjusting machine design. Moscow: Mashinostroenie; 1978, 216 р. (In Russ.).

19. Kolesnikova O.V., Lelyukhin V.E., Ignatev F.Yu. Formation of schemes generating geometric structure of machine parts. In: Proceedings of the 5th International Conference on Industrial Engineering. Lecture Notes in Mechanical Engineering. 2020;355-363. https://doi.org/10.1007/978-3-030-22063_138.

20. Antonenkova T.V. A way to formally design the structure of technological processes. In: Mezhdunarodnyj nauchnoissledovatel’skij zhurnal Tekhnologiya mashinostroeniya = International scientific research journal Engineering Technology. 2023;3:1-12. (In Russ.). https://doi.org/10.23670/IRL.2023.129.51. EDN: QPTVMU.

21. Ignatiev F.Yu., Kolesnikova O.V., Lelyukhin V.E. Investigation of the convergence of the automatic design algorithm of the mechanical processing technological process. Uchenye zapiski Komso-mol’skogo-na-Amure gosudarstvennogo tekhnicheskogo universiteta. Seriya: Nauki o prirode i tekhnike. Mashinostroenie = Scholarly Notes of Komsomolsk-naAmure State Technical University. Series: Engineering and Natural Sciences. Mechanical engineering. 2021;53:30-37. (In Russ.). https://doi.org/10.17084/20764359-2021-53-30. EDN: SHRRMZ.