3D modeling of the aircraft air conditioning system
https://doi.org/10.21285/1814-3520-2022-1-10-23
Abstract
The study aim was to develop a 3D model representing the aircraft air conditioning system with the purpose of performing a numerical experiment in an automated environment of engineering analysis. The completeness of this model was associated with the required result of the numerical experiment. During the experiment, we simulated conditions for the flow of aerodynamic processes in the vicinity of the louvre integrated into the fuselage skin at the point of communication between the air conditioning system and the external environment. Of particular interest was that part of the air conditioning system, which directly affects the louvre strength. The Siemens NX computer-aided design system was used to form a digital copy of the original. The toolkit of this system allows high-precision geometric models to be designed. As a result, a 3D-model was obtained applicable to simulate external and internal aerodynamical processes in the digital environment of engineering calculations for evaluating the strength parameters of the studied part. This model is a combination of geometric objects formed by a set of assembly units. In particular, such elements of the air conditioning system as the cooling turbine, radiator, and valve, are considered. In order to recreate the complex geometry of the original assembly parts of these units, an algorithm for selecting and performing typical operations of the Siemens NX system was developed and optimized for constructing correct 3D models. The constructed 3D model of the aircraft air conditioning system can be used when simulating external and internal aerodynamical processes affecting the louvre strength in the digital environment of engineering calculations. The proposed model allows users to study the structure of aircraft air conditioning systems.
About the Authors
A. F. Boev
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Arseniy F. Boev - Student
83, Lermontov St., Irkutsk 664074
I. V. Karpov
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Ivan V. Karpov – Student.
83, Lermontov St., Irkutsk 664074
V. B. Raspopina
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Vera B. Raspopina - Сand. Sci. (Eng.), Associate Professor, Associate Professor of the Department of Aircraft Engineering and Operation of Aviation Equipment.
83, Lermontov St., Irkutsk 664074
References
1. Elovenko D. A., Mironenko V. V. Rational methods for CAD models editing at the stage of their preparation for the analysis in CAE systems. Vestnik Bajkal'skogo soyuza stipendiatov DAAD = Letter der DAAD - Stipendiaten. 2013;1:26-34. (In Russ.).
2. Strekoz A. V., Sidorenko V. V., Ledovskih I. V. Analysis of the stress-strain state (SSS) of ailerons from polymer composite materials (PCM) using the finite element method (FEM). Izvestiya Yuzhnogo federal'nogo universiteta. Tekhnicheskie nauki = Izvestiya SFedU. Engineering Sciences. 2019;6:122-133. (In Russ.). https://doi.org/10.23683/2311-3103-2019-6-122-133.
3. Pronin A. I., Shchelkunov Ye. B., Sultangareeva A. Ye., Latyshev K. A., Ivanenko A. A. Research and working out of the bracket part with CAD/CAE systems. Uchenye zapiski Komsomol'skogo-na-Amure gosudarstvennogo tehnicheskogo universiteta. Seriya: Nauki o prirode i tehnike = Scholarly Notes of Komsomolsk-na-Amure State Technical University. 2017;I-1(29):27-32. (In Russ.). https://doi.org/10.17084/2017.I-1(29).
4. Protasov A. V., Nikolaychuk O. A. Applying the finite-element method for evaluating the reliability of mechanical systems. Journal of Machinery Manufacture and Reliability. 2011;40(1):27-30. https://doi.org/10.3103/S105261881101016X.
5. Klochkov Y. V., Nikolaev A. P., Vakhnina O. V., Kiseleva T. A. Stress-strain analysis of a thin-shell part of fuselage using a triangular finite element with Lagrange multipliers. Russian Aeronautics. 2016;59(3):316-323. https://doi.org/10.3103/S1068799816030041.
6. Ryzhikov I. N., Nguyen Tien Q. The use of the spring-mass-damping model for the analysis of vibrations of the mistuned power turbomachines impeller. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2020;24(4):756-767. (In Russ.). https://doi.org/10.21285/1814-3520-2020-4-756-767.
7. Ivaschenko A. P. Research of the static strength of a pinion which is part in a pinion-shaft. Sovremennii naukoemkie tehnologii = Modern high technologies. 2020;111:31-36. (In Russ.). https://doi.org/10.17513/snt.38334.
8. Lashkov V. A., Kalimullin F. A., Karataev O. R., Usmanov R. A. Three-dimensional design and engineering analysis of elements of a conic reducer in the Autodesk inventor system. Vestnik Kazanskogo tekhnologicheskogo universiteta. 2020;23(5):94-97. (In Russ.).
9. Zenkov E. V. Update of the equations of the limit state of the structural material with the realization of their de formation. Journal of Physics Conference Series. 2017;944(1):012128. https://doi.org/10.1088/17426596/944/1/012128.
10. Raspopina V. B., Bodrov E. A., Kovalyov A. A. Assessment of strength parameters in regard of a DBC connecting rod in the automated surroundings of an APM structure 3D component cell pertaining to an APM Win Machine system. Izvestiya vuzov. Investitsii. Stroitelstvo. Nedvizhimost = Proceedings of Universities. Investment. Construction. Real estate. 2011;1:125-137. (In Russ.).
11. Markov S. P., Raspopina V. B. Femap with NX Nastran system as a realibility assessment tool of numerical experiment results in the environment of the APM FEM program in COMPASS-3D. Aviamashinostroyeniye i transport Sibiri: sbornik statej XIV Mezhdunarodnoj nauchno-prakticheskoj konferencii = Aircraft Engineering and Transport of Siberia: collected articles of the 14th International Scientific and Practical Conference. 22 December, 2020. Irkutsk: Irkutsk National Research Technical University; 2020, 45-52. (In Russ.).
12. Zhiltsov Yu. V., Elshin V. V. Use of ANSYS CFX software for combined boiler model development. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2017;21(3):81-90. (In Russ.). https://doi.org/10.21285/1814-3520-2017-3-81-90. (In Russ.).
13. Leonovich D. S., Zhuravlev D. A., Karlina Yu. I., Govorkov A. S. Automated assessment of the low-rigid composite parts influence on the product assimilability in the GePARD system. In: Materials Science and Engineering: IOP Conference Series. 2020;760(1):012038. https://doi.org/10.1088/1757-899X/760/1/012038.
14. Dizon J. R. C., Espera A. H., Chen Qiyi, Advincula R. C. Mechanical characterization of 3D-printed polymers. Additive Manufacturing. 2017;20:4467. https://doi.org/10.1016/j.addma.2017.12.002.
15. Novikov A. D., Reznik S. V., Denisov O. V. An experimental study to determine mechanical and thermophysical characteristics of thin-walled carbon plastic antenna reflectors. BMSTU Journal of Mechanical Engineering. 2020;3:84-91. https://doi.org/10.18698/0536-1044-2020-384-91.
16. Gaidargi U., Kolada E. Digital approach for preparation for aviation equipment certification. SAPR i grafika. 2021;1:12-15. (In Russ.).
17. Glushkov T. D. The study of compact fan installations with variable circulation distribution along blade length. Vestnik Moskovskogo aviacionnogo instituta = Aerospace MAI Journal. 2020;27(1):30-42. https://doi.org/10.34759/vst-2020-1-30-42. (In Russ.).
18. Leggett J., Priebe S., Shabbir A., Michelassi V., Sandberg R., Richardson E. Loss prediction in an axial compressor cascade at off-design incidences with free stream disturbances using large eddy simulation. Journal of Turbomachinery. 2018;140(7):071005. https://doi.org/10.1115/1.4039807.
19. Ryzhikov I. N. The use of the spring-mass-damping model for the analysis of vibrations of the mistuned power turbomachines impeller. Sistemy. Metody. Tekhnologii = Systems. Methods. Technologies. 2020;4:20-25. https://doi.org/10.18324/2077-5415-2020-420-25. (In Russ.).
20. Yurgenson A. A. Combat training aircraft Yak-130. Prilozhenie zhurnala “Modelist-konstruktor”. 2006;9:32 р. (In Russ.). 21. Danilov Yu., Artamonov I. Practical use of NX. Moscow: DMK Press; 2011, 332 р. (In Russ.).
Review
For citations:
Boev A.F., Karpov I.V., Raspopina V.B. 3D modeling of the aircraft air conditioning system. iPolytech Journal. 2022;26(1):10-23. (In Russ.) https://doi.org/10.21285/1814-3520-2022-1-10-23
Views:
448
Email this article 