Improving the efficiency of the carbothermal reduction of red mud by microwave treatment

In this work, we studied the effect of microwave treatment of red mud briquettes containting more than 48% of Fe on the process of iron reduction under various conditions of heat treatment. Research samples were collected from red mud formed during the production of alumina from bauxite at the Ural Aluminum Smelter. The chemical composition of mud samples was examined by X-ray fluorescence analysis. The composition of initial mud and that of agglomerates obtained after treatment in microwave and muffle furnaces was studied using the X-ray diffraction method. Phase transitions and structural changes occurring under the effect of heating were studied by scanning electron microscopy. The experimental briquettes comprising red mud and charcoal were treated at 850°C and 1000°C in a microwave furnace (under the frequency of 2.45 GHz and the power of 900 W). For reference, briquettes of analogous composition were heat-treated in a muffle furnace under the same conditions. It was found that, under the conditions of microwave heating to 1000°C for 10 min, hematite is completely reduced to metallic iron after the addition of wustite. An analysis of the m i-crostructure of the samples after microwave treatment showed that the particles of metallic iron in the as-obtained pellet-agglomerates have a larger size than in those after conventional thermal heating in a muffle furnace. The metallized phases of reduced iron at the end of heat treatment in a microwave furnace create a stable durable body of agglomerates. The evidence-based parameters of the process can become a basis for designing a technology for recycling such an industrial material as red mud. The obtained high-strength pellets from red mud with a high content of reduced iron (up to 85%) may be used as an alternative charge material for ferrous metallurgy. The proposed technology for recycling red mud into pellet-agglomerates can be applied in various industries to reduce environmental impact on the production areas of alumina plants.

1. Khalifa AA, Utkov VA, Brichkin VN. Red mud effect on dicalcium silicate polymorphism and sinter self-destruction prevention. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2020;24(1 ):231 -240. (In Russ.) https://doi.org/10.21285/1814-3520-2020-1-231-240

2. Brichkin VN, Dubovikov OA, Nikolaeva NV, Besedin AA. Red mud dewatering and basic trends in its recycling. Obogashcheniye rud. 2014;1:44-48. (In Russ.)

3. Besedin AA, Utkov VA, Brichkin VN, Sizyakov VM. Red mud sintering. Obogashcheniye rud. 2014;2:28-31. (In Russ.)

4. Piirainen VY, Boeva AA, Nikitina TY. Application of new materials for red mud immobilization. Key Engineering Materials. 2020;854:182-188.

5. Trushko VL, Dashko RE, Kuskov VB, Klyamko AS. Technology of “cold” briquetting of rich ores of the Ja-kovlevsky deposit. Zapiski Gornogo Instituta = Journal of Mining Institute. 2011;190:133-137. (In Russ.)

6. Akcil A, Akhmadiyeva N, Abdulvaliyev R, Abhilash, Meshram P. Overview on extraction and separation of rare earth elements from red mud: focus on Scandium. Mineral Processing and Extractive Metallurgy Review. 2018;39(3): 145-151. https://doi.org/10.1080/08827508.2017.1288116

7. Dmitriev A. The comprehensive utilisation of red mud utilisation in blast furnace. In: Zhang Yingyi (ed.). Metallurgical Solid Waste. 2018. https://doi.org/10.5772/intechopen.80087

8. Zhou Xianlin, Luo Yanhong, Chen Tiejun, Zhu Deqing. Enhancing the reduction of high-aluminum iron ore by synergistic reducing with high-manganese iron ore. Metals. 2019;9(15):1 -12. https://doi.org/10.3390/met9010015

9. Pyagay IN, Kozhevnikov VL, Pasechnik LA, Skachkov VM. Processing of alumina production red mud with recovery of scandium concentrate. Zapiski Gornogo Instituta = Journal of Mining Institute. 2016;218:225-232. (In Russ.)

10. Pontikes Y, Angelopoulos GN. Bauxite residue in cement and cementitious applications: current status and a possible way forward. Resources, Conservation and Recycling. 2013;73:53-63. https://doi.org/10.1016/j.resconrec.2013.01.005

11. Paramguru RK, Rath PC, Misra VN. Trends in red mud utilization - a review. Mineral Processing and Extractive Metallurgy Review. 2005;26(1): 1 -29. https://doi.org/10.1080/08827500490477603

12. Rai S, Wasewar KL, Mukhopadhyay J, Yoo C, Uslu H. Neutralization and utilization of red mud for its better waste management. Archives of Environmental Science. 2012;6:13-33.

13. Garg A, Yadav H. Study of red mud as an alternative building material for interlocking block manufacturing in construction industry. International Journal of Materials Science and Engineering Study. 2015;3(4):295-300. https://doi.org/10.17706/ijmse.2015.3.4.295-300

14. Trushko VL, Kuskov VB, Kuskova YV. Integrated processing of highigrade iron ores. Obogashcheniye rud. 2014;1:39-43. (In Russ.)

15. Kuskova YV, Kuskov VB. Development of technology for the production of natural red iron oxide pigments. Inzynieria Mineralna = Journal of the Polish Mineral Engineering. 2017;1:217-220.

16. Agrawal S, Rayapudi V, Dhawan N. Extraction of iron values from red mud. Materials Today: Proceedings. 2018;5(9-1 ):17 064-17 072. https://doi.org/10.1016/j.matpr.2018.04.1 13

17. Agrawal S, Rayapudi V, Dhawan N. Microwave reduction of red mud for recovery of iron values. Journal of Sustainable Metallurgy. 2018;4(3):427-43. https://doi.org/10.1007/s40831-018-0183-3

18. Trushko VL, Utkov VA, Sivushov AA. Reducing the environmental impact of blast furnaces by means of red mud from alumina production. Steel in Translation. 2017;47(8):576-578. https://doi.org/10.3103/S0967091217080149

19. Shiryaeva EV, Podgorodetskiy GS, Malysheva TYa, Detkova TV, Gorbunov VB. Influence of lowalkali red mud on the composition and structure of sintering batch consisting of heterogeneous iron ore concentrates. Steel in Translation. 2014;44(9):625-628. https://doi.org/10.3103/S0967091214090150

20. Trushko VL, Utkov VA. Development of import substituting technologies for increasing productivity of sintering machines and strength of agglomerates. Zapiski Gornogo Instituta = Journal of Mining Institute. 2016;221:675-680. https://doi.org/10.18454/pmi.2016.5.675

21. Podgorodetskiy G, Gorbunov V, Panov A, Petrov S, Gorbachev S. Complex additives on the basis of red mud for intensification of ironore sintering and pelletizing. In: Hyland M (ed.). Light Metals; 2015, p. 107-111. https://doi.org/10.1002/9781119093435.ch20

22. Kumar R, Srivastava JP, Premchand. Utilization of iron values of red mud for metallurgical applications. In: Bandopadhyay A, Goswami NG, Rao PR (eds.). Environmental and Waste Management. Jamshedpur: National Metallurgical Laboratory; 1998, p. 108-119. https://doi.org/10.13140/RG.2.1.2077.7446

23. Balomenos E, Panias D. Iron recovery and production of high added value products from the metallurgical byproducts of primary aluminium and ferronickel industries. In: 3rd International Slag Valorisation Symposium. 19-20 March 2013, Leuven. Leuven; 2013, p. 161-172.

24. Branca TA, Colla V, Algermissen D, Granbom H, Martini U, Morillon A, Pietruck R, Rosendahl S. Reuse and recycling of by-products in the steel sector: Recent achievements paving the way to circular economy and industrial symbiosis in Europe. Metals. 2020;10(3):345. https://doi.org/10.3390/met10030345

25. Sadangi JK, Das SP, Tripathy A, Biswal S. K. Investigation into recovery of iron values from red mud dumps. Separation Science and Technology. 2018;53(14):2186-2191. https://doi.org/10.1080/01496395.2018.1446984

26. Utkov VA, Leontiev LI. Increasing the strength of agglomerates and pellets with bauxite red mud. Stal’. 2005;9:2-4. (In Russ.)

27. Singh S, Gupta D, Jain V, Sharma AK. Microwave processing of materials and applications in manufacturing industries: A Review. Materials and Manufacturing Processes. 2015;30(1): 1 -29. https://doi.org/10.1080/10426914.2014.952028

28. Jones DA, Lelyveld TP, Mavrofidis SD, Kingman SW, Miles, NJ. Microwave heating applications in environmental engineering - a review. Resources, Conservation and Recycling. 2002;34(2):75-90. https://doi.org/10.1016/S0921-3449(01)00088-X

29. Nishioka K, Taniguchi T, Ueki Y, Ohno K-I, Maeda T, Shimizu M. Gasification and reduction behavior of plastics and iron ore mixtures by microwave heating. ISIJ International. 2007;47(4):602-607. https://doi.org/10.2355/isijinternational.47.602

30. Das S, Mukhopadhyay AK, Datta S, Basu D. Prospects of microwave processing: An overview. Bulletin of Materials Science. 2009;32(1): 1 -13. https://doi.org/10.1007/s12034-009-0001-4

31. Guo Sheng-hui, Chen Guo, Peng Jin-hui, Chen Jin, Li Dong-bo, Liu Li-jun. Non-isothermal microwave leaching kinetics and absorption characteristics of primary titanium-rich materials. Transactions of Nonferrous Metals Society of China. 2010;20(4):721 -726. https://doi.org/10.1016/S1003-6326(09)60204-1

32. Omran M, Fabritius T. Improved removal of zinc from blast furnace sludge by particle size separation and microwave heating. Minerals Engineering. 2018;127:265-276. https://doi.org/10.1016/j.mineng.2018.08.002

33. Bykov YuV, Rybakov KI, Semenov VE. High-temperature microwave processing of materials. Journal of Physics D: Applied Physics. 2001;34:R55-R75. https://doi.org/10.1088/0022-3727/34/13/201

34. Clark DE, Folz DC, West JK. Processing materials with microwave energy. Materials Science and Engineering A. 2000;287(2):153-158. https://doi.org/10.1016/S0921-5093(00)00768-1

35. Veres J, Lovas M, Hredzak S, Zubrik A, Dolinska S, Sknnsky J. Application of microwave energy in waste treatment. Inzynieria Mineralna = Journal of the Polish Mineral Engineering. 2017;2017(1 ):39-44.

36. Agrawal D. Latest global developments in microwave materials processing. Materials Research Innovations. 2010; 14(1):3-8. https://doi.org/10.1179/143307510X12599329342926

37. El-Geassy AA, Halim KSA, Bahgat M, Mousa EA, El-Shereafy EE, El-Tawil AA. Carbothermic reduction of Fe2O3/C compacts: Comparative approach to kinetics and mechanism. Ironmaking and Steelmaking. 2013;40(7):534-544. https://doi.org/10.1179/1743281212Y.0000000076

38. Aune RE, Seetharaman S. Thermodynamic aspects of metals processing. In: Seetharaman S. (ed.). Fundamentals of metallurgy. England: ED; 2005, p. 38-81.

39. Haque KE. Microwave energy for mineral treatment processes - a brief review. International Journal of Mineral Processing. 1999;57:1-24.

40. Litvinenko V. The role of hydrocarbons in the global energy agenda: the focus on liquefied natural gas. Resources. 2020;9(59): 1 -22. https://doi.org/10.3390/resources9050059

41. Litvinenko VS. Digital economy as a factor in the technological development of the mineral sector. Natural Resources Research. 2020;29(3):1521-1541. https://doi.org/10.1007/s11053-019-09568-4