Edge quality control system at finishing treatment by elastic polymer abrasive tools and its analysis. Part 1
https://doi.org/10.21285/1814-3520-2020-5-977-992
Abstract
The purpose of the paper is to create a control system of edge quality under finishing machining of parts by elastic polymer abrasive tools, which are effective in surface conditioning and rounding of part edges. The principle of the system approach is used for a formalized description of the system characterized by the mutual interaction between the subsystems that form it. Consideration is given to the control system of these finishing operations design in order to ensure the required quality (in terms of surface roughness, size and geometric accuracy of edges) and optimal process performance under a large variety of tool designs and shapes of the processed surfaces and their mutual arrangement. The system includes input parameters, state space (subroutines) and output data. The input parameters of the system include equipment, workpiece and tool. The state space includes subsystems of mathematical interaction models of tool and surface and forces on the basis of which the mathematical models of material removal, roughness formation, power consumption, tool wear, and cutting zone temperature operate. The information from these subsystems is transmitted to the subsystem for optimizing finishing operation parameters. An algorithm for designing finishing technological operations is presented. It consists of source data input to the system, analysis of operation functional capability, decisions on the possibility of changes in the input data, control action formation, designing of operation, organization of preparation for operation execution, control of operation execution results for the compliance with the requirements of normative and technical documentation and finishing operation implementation in mass production. The developed system provides optimal tools and processing modes as a result of fulfillment of its functions. When this information is implemented in the manufacturing process of parts, the required quality indicators (surface roughness, size and geometric accuracy of edges) are provided as well as the optimal process performance.
About the Authors
Yu. V. Dimov
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Yury V. Dimov, Dr. Sci. (Eng.), Professor, Professor of the Department of Designing and Standardization in Mechanical Engineering
83, Lermontov St., Irkutsk 664074
D. B. Podashev
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Dmitry B. Podashev, Cand. Sci. (Eng.), Associate Professor of the Department of Designing and Standardization in Mechanical Engineering
83, Lermontov St., Irkutsk 664074
References
1. Abrashkevych Yu, Machyshyn G. Effective use of the polymer-abrasive brush. Vestnik Har'kovskogo nacional'nogo avtomobil'no-dorozhnogo universiteta = Bulletin of Kharkov National Automobile and Highway University. 2016;73:59–62.
2. Dimov YuV, Podashev DB. Studying surface quality under edge rounding by polymeric and abrasive brushes. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2016;20(9):23–34. (In Russ.) https://doi.org/10.21285/1814-3520-2016-9-23-34
3. Dimov YuV, Podashev DB. Research of productivity of edge fillet process by polymer abrasive brushes. Vestnik mashinostroeniya. 2017;3:74–78. (In Russ.)
4. D’yakonov AA, Shipulin LV. Selecting the cutting conditions for plane grinding by the wheel periphery. Russian Engineering Research. 2014;34(12):814–816. https://doi.org/10.3103/S1068798X14120119
5. Dyadya SI, Gonchar NV, Stepanov DN, Chernyi VI, Alekseenko OV. Validation of the polymer-abrasive fibers selection for finishing operations procession. Novi materiali i tekhnologiї v metalurgiї ta mashinobuduvanni = New Materials and Technologies in Metallurgy and Mechanical Engineering. 2010; 2:145–148.
6. Fomin AA, Gusev VG, Sattarova ZG. Geometrical errors of surfaces milled with convex and concave profile tools. Solid State Phenomena. 2018;284:281–288. https://doi.org/10.4028/www.scientific.net/SSP.284.281
7. Fomin AA. Microgeometry of surfaces after profile milling with the use of automatic cutting control system. In: International Conference on Industrial Engineering, Applications and Manufacturing. 2017. https://doi.org/10.1109/ICIEAM.2017.8076117
8. Li Ning, Ding Jinfu, Hu Liguang, Wang Xiao, Lu Lirong, Huang Jianmeng. Preparation, microstructure and compressive properties of silicone GEL/SiC composites for elastic abra-sive. Advanced Composites Letters. 2018;27(3):122–128. https://doi.org/10.1177/096369351802700305
9. Provolotcky A, Negrub S. Using polymer-abrasive elastic tools for finishing operations Vestnik Har'kovskogo nacional'nogo avtomobil'no-dorozhnogo universiteta = Bulletin of Kharkov National Automobile and Highway University. 2006;33:106–108.
10. Stepanov DN. Influence of polymer-abrasive tool parameters and method of processing on the roughness of titanium alloy BT8-M surface. Novi materiali i tekhnologiї v metalurgiї ta ma-shinobuduvanni = New Materials and Technologies in Metallurgy and Mechanical Engineering. 2012;2:87–90.
11. Ustinovich DF. Experimental study of flat surface quality when machining by disk abrasive brushes. Vestnik Polockogo gosudarstvennogo universiteta. Seriya V: Promyshlennost'. 2009;8:130–134.
12. Ustinovich DF, Pribylsky VI. Effect of processing conditions on power of grinding by polymeric-abrasive disk brushes. Mekhanika mashin, mekhanizmov i materialov = Mechanics of Machines, Mechanisms and Materials. 2012;1:75–79.
13. Chapyshev AP, Ivanova AV, Kryuchkin AV. Technological capabilities of processes of details mechanized finishing processing. Izvestiya Samarskogo nauchnogo tsentra Rossiiskoi akademii nauk = Izvestia of Samara Scientific Center of the Russian Academy of Sciences. 2013;15(6):533–537. (In Russ.)
14. Chapyshev AP, Starodubtseva DA. The program module designated processing conditions finishing employing automatic brushing stationary installation. Vestnik Permskogo nacional'nogo issledovatel'skogo politekhnicheskogo universiteta. Seriya: Mashinostroenie, materialovedenie = Bulletin of Perm National Research Polytechnic University. Series: Mechanical Engineering, Materials Science. 2016;18(2):21–37. https://doi.org/10.15593/2224-9877/2016.2.02
15. Xiaojun Wu, Zhu Chen, Tianze Zhou, Changjie Ma, Xiao Shu, Jianyuan Dong. Research on processing efficiency and contact characteristics of M300 steel surface grinding with elastic abrasives. Journal of Mechanical Engineering. 2018;54(1):171–177. https://doi.org/10.3901/JME.2018.01.171
16. Xiao-Jun Wu, Tian-Ze Zhou, Zhi-Xue Tong. Experimental study on surface quality in elasticity ball-end grinding of M330 steel. Journal of Computational and Theoretical Nanoscience. 2017;14(11):5372–5377. https://doi.org/10.1166/jctn.2017.6954
17. Yuan Julong, Zhe Wu, Binghai L(U), Ducnam Nguyen, Huizong Lu, Ping Zhao. Review on ultra-precision polishing technology of aspheric surface. Journal of Mechanical Engineering. 2012;48(23):167–177.
18. Yakovlev DR, Pini BE. On the issue of interaction between the abrasive polymer brush’s fiber and the treating surfaces. Izvestiya Moskovskogo gosudarstvennogo tekhnicheskogo universiteta MAMI = Izvestiya MGTU MAMI. 2009;2:184–187. (In Russ.)
19. Buslenko NP. Modeling of complex systems. Moscow: Nauka; 1978, 400 p. (In Russ.)
20. Boltyanskiy VG. Optimal control of discrete processes. Moscow: Nauka; 1973, 448 p. (In Russ.)
21. Mesarovich M, Mako D, Takahara I. Theory of hierarchical, multilevel, systems. 1973, 344 p. (Russ. ed.: Teoriya ierarhicheskih mnogourovnevyh sistem. Moscow, Mir, 1973, 344 p.)
22. Novoselov YuK. Surface formation dynamics under abrasive treatment. Sevastopol: Sevastopol National Technical University; 2012, 304 p.
23. Astrom K, Wittenmark B. Computer-controlled systems, 1987, 480 p. (Russ. ed.: Sistemy upravleniya s elektronnovychislitel'noj mashinoj, Moscow, Mir, 1987, 480 p.)
Review
For citations:
Dimov Yu.V., Podashev D.B. Edge quality control system at finishing treatment by elastic polymer abrasive tools and its analysis. Part 1. Proceedings of Irkutsk State Technical University. 2020;24(5):977-992. (In Russ.) https://doi.org/10.21285/1814-3520-2020-5-977-992
Views:
289
Email this article 