VIRTUAL SHAPING OF THE MACHINED SURFACE UNDER EXTERNAL CYLINDRICAL GRINDING WITH A TRAVERSE FEED
https://doi.org/10.21285/1814-3520-2018-8-10-16
Abstract
PURPOSE. The paper deals with the model of shaping a processed surface in the operation of external cylindrical grinding with a traverse feed performed in an automatic cycle on CNC machines. The developed model of surface formation allows to conduct a step-by-step calculation of the current values of the actual radial in-feed and radii sizes in the different sections of the machined surface and predict the values of grinding surface dimensions throughout the whole grinding cycle for the given processing conditions. METHODS. The basis for the creation of computer-aided design systems serve the data presented in the regulatory literature that makes their use inefficient for the development of cycles for CNC machines. Existing engineering techniques also based on the recommendations of regulatory literature or on particular empirical data do not take into account the changes in variable processing conditions. RESULTS AND THEIR DISCUSSION. The paper discusses the simulation features of grinding cycles along the length of the machined part surface, shows a calculation scheme that establishes the relationship between the graphs of the accumulated software (tпk,i,z) and actual (tф k,i,z) feeds, tension (tн k,i,z), elastic strain (у k,i,z) of the technological system with the radii of the machined surface (R k,i,z ) when grinding a non-circular workpiece with the maximum radius (Rзагmax), original workpiece radii (Rзагk) and initial radial run-out, which is calculated by formulas. CONCLUSIONS. Presented in the article formation model of the grinding surface in the operation of external cylindrical grinding with a traverse feed performed on a CNC machine allows to predict the actual dimensions of the machined surface for a given cycle and technological conditions of machining as well as to construct a model of the machined surface.
About the Authors
M. K. Alsigar
South Ural State University; University of Dhi Qar
Russian Federation
Russian Federation
P. P. Pereverzev
South Ural State University; Financial University under the Government of the Russian Federation
Russian Federation
Russian Federation
References
1. Malkin S., Cook N. The wear of grinding wheels. Part 1. Attritious wear. Trans ASME J Eng Ind 93. 1971. Р. 1120-1128.
2. Переверзев П.П., Акинцева А.В. Моделирование процесса съема металла при внутреннем шлифовании с учетом особенностей кинематики резания // СТИН. 2016. №. 4. С. 23-27.
3. Eda H., Ohmura E., Yamauchi S., Inasaki I. Computer visual simulation on structural changes of steel in grinding process and experimental verication, CIRP Annals-Manufacturing Technology. 1993. No. 42 (1). Р. 389-392.
4. Rowe W.B., Black S.C.E., Mills B., Qi H.S., Morgan M.N. (1995) Experimental investigation of heat transfer in grinding. CIRP Ann Manuf-Technol. No. 44(1). Р. 329-332.
5. Маслов Е.Н. Теория шлифования материалов. М.: Машиностроение, 1974. 319 с.
6. Лурье Г.Б. Шлифование металлов. М.: Машиностроение, 1969. 192 с.
7. Переверзев П.П., Алсигар М.К. Моделирование процесса съема металла в автоматических циклах круглого наружного шлифования с продольной подачей // Металлообработка. 2017. № 6. С. 55-60.
8. Morgan M.N., Cai R., Guidotti A., Allanson D.R., Rowe W.B. Forces and temperatures in hard turning. Machining Science and Technology. Vol. 10. Issue 2, 1 July 2006, Pages. Р. 157-179.
9. Novoselov YU.K. Dinamika formoobrazovaniya poverhnostej pri abrazivnoj obrabotke. Sevastopol': SevNTU Publ., 2012. 304 р.
10. Rowe W.B., Black S.C.E., Mills B., Qi H.S., Morgan M.N. Experimental investigation of heat transfer in grinding. CIRP Ann Manuf-Technol. 1995. No. 44(1). Р. 329-332.
11. Malkin S., Cook N.H. The wear of grinding wheels. Part 1. Attritions' wear. ASME J Eng Ind. 1971. No. 93. Р. 1120-1128.
12. Переверзев П.П., Алсигар М.К. Математическое моделирование процесса силы резания при шлифовании с продольной подачей // Автоматизированное проектирование в машиностроении: материалы V Междунар. заоч. науч.-практ. конф. (г. Новокузнецк, 29-30 ноября 2017 г.). Новокузнецк, 2017. № 5. С. 49-55.
13. Rowe W.B., Morgan M.N. The effect of deformation on the contact area in grinding. CIRP Ann Manuf Technol. 1993. No. 42(1). Р. 409-412.
14. Brinksmeier E., Aurich J., Govekar E., Heinzel C., Hoffmeister H., Klocke F. Advances in modeling and simulation of grinding processes. Ann. CIRP. 2006. No. 55 (2). Р. 667-696.
15. Inasaki I., To¨nshoff H.K., Howes T.D. Abrasive machining in the future. Keynote. Paper, Ann. CIRP. 1993. No. 42 (2). Р. 723-732.
Review
For citations:
Alsigar M.K., Pereverzev P.P. VIRTUAL SHAPING OF THE MACHINED SURFACE UNDER EXTERNAL CYLINDRICAL GRINDING WITH A TRAVERSE FEED. Proceedings of Irkutsk State Technical University. 2018;22(8):10-16. (In Russ.) https://doi.org/10.21285/1814-3520-2018-8-10-16
Views:
180
Email this article 